Vevor 62cc Chainsaw Review: Raw Power or Heavy Mistake?

Vevor 62cc Chainsaw Review Raw Power or Heavy Mistake

This saw felt very heavy right out of the box. The plastic case looked cheap in the bright sun. But the thick metal parts felt very strong for hard work. It took me twenty minutes to put it together. It felt like holding a big metal block.

Adding gas and oil was a huge mess at first. The tank holes are small. You will need a funnel to fill this saw. When it started, the loud noise hurt my ears. A thick cloud of smoke puffed out the back.

Key Specifications

Let us look at what this tool gives you. These facts help you know what you are buying. It is built for raw power, not fancy tricks. I always check these facts before I spend my cash. Here is a quick look at its main traits.

FeatureDetails
Engine Power62cc Gas Motor
Bar Length20 Inches
Weight15.4 lbs (With fuel)
Fuel Type40:1 Gas and Oil Mix
Best UseThick logs and storm clean up

Who This Chainsaw Is For (And NOT For)

Not every tool fits every person out in the yard. If you need the best chainsaw for home use, this works. It is a good pick for rough, dirty jobs. You just need to know what you are buying.

Good For:

  • People cutting big logs on a tight budget.
  • Folks who need raw power for cheap.
  • Making yard fire logs for the cold winter.

NOT Good For:

  • New users who fear heavy, loud power tools.
  • People who want a light tool for small branches.
  • Pro guys cutting huge forest trees every day.

Real Performance Breakdown

I took this saw out to do some real work. Here is how it handled the tough yard jobs.

Cutting Power

I used this saw to cut thick, wet oak logs. The big motor did not stall or slow down. It cut through the green wood fast for a cheap tool. If you want the best chainsaw for cutting trees on a budget, this works. Keep the chain sharp, or the power means nothing.

I switched to dry pine next. The saw just flew right through the soft wood. It threw big wood chips all over the grass. It slowed down a bit on thick, hard knots. But the cutting speed was great for the low price.

Handling & Weight

I will be honest about how this feels to hold. This saw gets heavy fast when you work hard. My arms felt a deep burn after fifteen minutes. It weighs fifteen pounds with gas and oil in it. Awkward side cuts are very hard to do.

You must let the heavy weight do the hard work. If you push it down hard, you will tire out fast. Holding it sideways to cut a stump is the hardest part. The saw is front heavy because of the long bar. You need strong arms to swing this safely all day.

Starting & Ease of Use

Starting this cold saw is a bit of a workout. It takes me five strong pulls to wake it up. Warm starts are much faster and take one pull. The plastic choke switch feels weak and cheap. I am very careful not to snap it off.

The gas trigger feels nice and snappy once it runs. It speeds up fast with no motor stutters. But the idle speed was set too high at first. The chain kept spinning when I let go of the gas. I had to use a tool to fix the idle screw.

Bar & Chain Reality

The long bar gives you reach for big tree trunks. You can cut a three foot tree from both sides. But a long bar takes real practice and deep focus. A long bar means the tip might hit unseen things. That is how bad kickback hurts you in the woods.

A cheap chain will stretch out very fast. This stock chain stretched twice on my first day. If the chain gets loose, it will jump off the bar. A dull chain makes the motor work too hard. You should buy a good name brand chain right away.

Bar SizeReal Use CaseDifficulty Level
14 to 16 InchSmall branch and yard cutsEasy for most users
18 InchNormal logs and medium treesMedium effort needed
20 Inch (This Saw)Thick logs and large storm messHard to control safely

Safety Experience

Safety is no joke when using a big gas saw. A long bar can kick back fast and hard. If the tip hits a branch, the saw jumps up. The chain brake snapped shut fast when I tested it. You must test that top brake before you cut wood.

The heavy weight helps keep the saw stable on straight cuts. But you can lose balance if you lean too far forward. Keep a firm grip and stand flat on your two feet. Never cut anything higher than your chest with this saw. It is too heavy to hold safely up in the air.

RiskWhen It HappensHow to Avoid
Bad KickbackTip of the bar hits a hidden branchHold firm and do not cut with the tip
Chain JumpCutting with a loose or stretched chainCheck tension after ten cuts
Fall OverLeaning too far forward with the heavy sawKeep feet wide and let the saw drop

Maintenance Reality

Gas saws need constant care to stay alive. You must mix your fuel and oil right every time. Use the best 2 stroke oil for chainsaw motors to save it. Cheap oil will clog the parts and kill the motor fast. Shake the mixed gas can well before you pour it.

The air filter clogs fast when cutting dry, dusty wood. You will spend time taking the cover off to clean it. If you skip this, the saw will stall out fast. The chain oil track also clogs with wet wood dust. I scrape out the track with a knife after every use.

TaskWhen NeededDifficulty
Mix FuelEvery time you run out of gasEasy but very messy
Tighten ChainTwo or three times a dayAnnoying due to screw spot
Clean FilterAfter cutting dry, dusty woodQuick and simple

Pros and Cons

Every tool has good points and bad points to weigh. I do not trust perfect tools, mostly at this low price. Here is the pure truth about what I liked and hated. You need to know both sides before you buy it.

Pros

  • It gives you massive raw power for a very low price.
  • The long bar cuts thick yard logs with total ease.
  • Finding a better chainsaw for firewood at this cost is hard.

Cons

  • It is very heavy and will tire your arms out fast.
  • The cheap chain stretches fast and needs daily fixes.
  • Cold starts are a real pain on cold winter days.

Common Problems I Noticed

Every cheap tool has quirks and real flaws. The gas cap leaked fuel when I tipped it on the grass. My bare hands almost slipped off the wet handle. It also drinks gas much faster than my old yard saw. You will stop to fill the gas tank a lot.

The chain screw is in a very bad spot near the bar. It makes quick field fixes a huge pain. You hold the bar up while turning the screw at the same time. The cheap metal nuts strip fast if you pull too hard. You must be gentle when fixing this saw.

ProblemCauseImpact
Gas LeaksCheap rubber seal in the gas capMakes the handle slick and smells bad
Chain StretchLow quality metal in the stock chainForces you to stop cutting a lot
Hard StartsStiff motor and cheap choke switchMakes your arm tired before you cut

Comparison With Similar Models

You have choices if you want the best chainsaws for the money. You might look at a cheap Poulan or a base Husqvarna. The Vevor wins on price but loses on build quality. The big name brands start easier and last much longer. But the Vevor holds its ground well for raw, cheap power.

You must pick what matters to your wallet and arms. A lighter saw costs more but saves your back from pain. This cheaper saw saves money but takes raw muscle. Look at the chart below to see the real facts. It will help you see the truth right now.

ModelBetter ForWhy
Vevor 62ccStrict budgets and thick storm logsMost raw power for the lowest cost
Husqvarna 135Weekend chores and easy, fast startsVery light and lasts for many years
Poulan Pro 50ccNormal yard work and basic fire logsBetter balance but costs a bit more

Final Verdict

Should you buy this big saw for your messy yard? Yes, if you need to cut big logs on a tight budget. It is the best chainsaw for homeowner needs twice a year. It gives you the brute force to clear bad storm damage. You get a ton of cutting power for little cash.

Skip this if you want a light, easy saw for weekend chores. Do not buy this if you hate loud noise or heavy lifting. It is a heavy beast that needs hard work and strong arms. You must be ready for a workout every time you start it. Read this vevor 62cc chainsaw review again if you are unsure.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top