Are Spyder Saw Blades Any Good? A Fantastic Honest Review

It happens to all of us who work out in the wood shop. You are right in the middle of a big yard job. You need to make a fast cut to finish your frame. Then, your trusty old tool goes dull on you.

You drive to the local hardware store right away to look for help. You walk down the main aisle and see a huge wall of tool options. You spot a bright blue box and stop to look at it closely. You ask yourself: are spyder saw blades any good?

I had the exact same thought just a few short months ago. I needed a sharp strong edge that would last a long time. I decided to buy a few packs and test them out myself.

Why I Chose to Buy and Test Them

I have used many kinds of brands over the past few years. Some of them are great, and some let me down very fast. Spyder is a brand you see a lot at big local home stores. They promise fast cuts and a very long life for your tools.

The bright blue paint makes them jump right out at you on the store shelf. But I wanted to know if they were more than just flashy bright paint. I bought a round disc to use on my rough wood cuts. I also bought a small pack of tools for my basic jigsaw tasks.

My plan was to use them for my next three home build jobs. I wanted to give them a real true test in my own backyard. I did not want to rely on what the box said.

First Looks When I Opened the Box

Taking them out of the pack, they felt heavy and very solid. The blue coat on the round tool looks really slick and neat. They say this thin coat helps stop hot heat and side wear. Less heat means the steel should stay sharp for a much longer time.

I rubbed my thumb near the hard tips on the sharp edge. They felt very sharp and looked to be well made for tough tasks. I did not see any bad flaws or rough spots on the strong metal frame.

This gave me high hopes before I even made my first real test cut. The tool just felt right when I held it tight in my bare hand. It felt like a tool that was meant to do hard work.

Blade Specs at a Quick Glance

Here is a quick clear list of the tools I bought for this job. This helps you know what gear I used for my yard tests. I like to keep things simple and clear for you to read fast.

Making the First Test Cuts in Wood

My first big test was cutting some plain pine boards for a yard box. I loaded the fresh blue disc into my corded power saw. The first pass felt like a hot knife going right through soft plain butter.

The saw pushed through the thick wood board with no hard effort at all. The slick blue coat seemed to do its main job quite well here. The tool did not bind, stick, or smoke during the fast straight cut.

The side edge of the cut was quite smooth for a rough wood tool. I was very pleased with this fast and clean strong start. It made me want to keep cutting more scrap wood all day long.

Wood Cutting Results Near Me

I wanted to track how well it cut across different types of wood parts. So, I made a short list of my true results to share with you. I tested a few kinds of boards straight from my scrap pile.

Pushing Limits on Tougher Jobs

Next, I had some old scrap yard wood filled with rusty steel nails. This is where most cheap steel breaks and loses its sharp tips. I put the tough demo tool in my heavy duty big yard saw.

I held my breath tight and cut right into a hidden bad nail. The power saw did not jump or kick back at my tight hands. The steel sliced right through the hard dry wood and the metal nail.

I checked the sharp tips after making ten of these hard fast cuts. To my joy, the tips were still sharp and fully whole for more work. This proved to me that they are built tough for bad hard jobs.

Metal and Hard Material Test Results

Here is how the items held up against the hard tough stuff. It is always smart to know the strict limits of your shop gear. I tried a few hard tasks to see what would break or snap.

The Best Things I Found Out

There are a few key things I really love about these neat items. First, the cut speed is very good right out of the fresh box. You do not have to push hard to make your power tools work well.

Second, the hard tips seem tough and well built for big home jobs. They handle bad hidden nails much better than my old cheap tools did. I felt very safe using them on rough demo jobs around the house.

Third, the clear price tag is quite fair for what you get today. They cost much less than top brand names but work almost as well. This makes them a very smart pick for the basic home shop guy. I plan to stock up on them when they go on a store sale.

Things That Could Be a Bit Better

To be fair to you, no tool is perfect for every single home job. I did spot a few small bad issues during my long shop tests. The bright blue paint starts to wear off after a lot of fast cuts.

This does not ruin the clean cut itself, but it looks a bit ugly. Also, their fine cut tools leave a bit of rough edge on thin flat wood. If you build fine fancy wood chairs, you might want a top brand.

But for rough home frames and basic quick fixes, they are just great. I still think they hold a lot of real true value for most normal folks. You just have to know what jobs they are best meant to do.

How They Match Up to Big Rivals

You might wonder how they stand next to big names like Diablo today. Here is my quick clear take on that based on my own shop work. I try to be fair when I judge and rate big tool brands.

Are Spyder Saw Blades Any Good for You?

So, we come back to the main big question we had at the start. Are spyder saw blades any good for your own home wood shop? Based on my true yard tests, I would say yes, they are very good tools.

They give you a strong good mix of fast cuts and a long shop life. They will not drain all the cash in your wallet like pro brands do. I plan to keep a bunch of them in my red tool bag from now on.