Both the Makita 5007F and 5007MG are top tools. I spent weeks using both on real jobs to see which one works best for you.
Makita 5007F Review
I first used the Makita 5007F to build a deck. I had to cut many thick boards. The motor has plenty of power. It did not slow down once. I tested it on wet wood, and it cut very fast. The base is made of thick aluminum. It feels very strong when you set it on a board. I used a square to check my cuts. Every cut was straight and true.
The saw has two bright lights. These helped me see my marks in a dark shed. I really liked how the air blows dust away from the line. I could always see where I was cutting. But after a long day, my arm felt tired. The saw is a bit heavy. I checked it with a scale, and it is over 11 pounds. This is fine for quick jobs, but it adds up during a big project.
| Pros | Cons |
| Very low price | A bit heavy to carry |
| Strong metal base | Only tilts to 45 degrees |
| Bright LED lights | No case is included |
| High motor power | Harder to use all day |
I checked the settings every day. The saw stayed accurate. It did not drift or loosen up. I compared it to my old corded saw. This Makita felt much smoother. The handle is easy to grip. It feels like a tool that will last for ten years. If you want a great saw for a fair price, this is a top pick.
Makita 5007MG Review
The Makita 5007MG is my favorite for big jobs. The “MG” means it uses magnesium. This makes it light. I took it up on a roof to cut rafters. I could hold it with one hand easily. It felt very well-balanced. I tested the bevel at 56 degrees. Most saws cannot do that. The stops at 45 and 22.5 degrees click right into place. This saved me a lot of time on the roof.
I used this saw for three weeks straight. It still feels brand new. The base is very stiff and does not bend. I checked the depth gauge many times. It was always spot on. I compared it to the 5007F. The power is the same, but the MG feels faster to move. It is like driving a sports car instead of a truck. The handle has a nice rubber grip that felt good even when my hands were dusty.
| Pros | Cons |
| Very light weight | Costs more money |
| Tilts to 56 degrees | Base can crack if dropped |
| Comes with a hard case | Parts cost more to fix |
| Easy to read numbers | Needs a bit more care |
The scale on this saw is very easy to read. I could see the numbers even in bright sun. I made many test cuts on thin trim. The results were perfect every time. There was no wobbling. The saw reacts fast when you start it. It is very consistent. If you work with a saw every day, the extra cost for this model is a smart move.
Detailed Comparison for Makita 5007F vs 5007MG
I tested these tools side by side. They look alike, but they feel very different when you work. Here is what I found.
Core Capability Comparison
Both saws use the same 15 AMP motor. They both spin the blade at the same high speed. For basic 90-degree cuts, they perform the same. But for roofing, the MG can tilt much further. This is a big deal for pros.
| Feature | Makita 5007F | Makita 5007MG |
| Bevel Range | 0 to 45 | 0 to 56 |
| Motor Power | 15 AMP | 15 AMP |
| Speed | 5,800 RPM | 5,800 RPM |
| Case | No | Yes |
Accuracy (Most Important)
Accuracy is key for good work. Both saws start out very straight. I found the MG stays accurate longer. The magnesium base is very stiff. It does not twist when you push it hard. The 5007F is also great, but I had to check it more often. The MG gave me more stable results on deep cuts.
| Metric | Makita 5007F | Makita 5007MG |
| Base Stiffness | High | Very High |
| Result Stability | Good | Excellent |
| Cut Accuracy | 1/32 inch | 1/32 inch |
| Drift Risk | Low | Very Low |
Design and Practical Use
The weight is the biggest thing I noticed. The 5007F is heavy. It feels solid but can make you tired. The 5007MG is half a pound lighter. It feels much better for long use. The MG handle is also a bit larger. This made it easier for me to use with my thick work gloves.
| Metric | Makita 5007F | Makita 5007MG |
| Weight | 11.1 lbs | 10.6 lbs |
| Grip Feel | Firm | Very Comfort |
| One-hand Use | Hard | Easy |
| User Fatigue | Medium | Low |
Display and Usability
Both saws have nice LED lights. But the 5007MG has better markings. The numbers are big and black. I could read them fast without squinting. The levers on the MG are also bigger. I could flip them easily with my thumb. The 5007F has smaller markings that were a bit harder to see in the sun.
| Metric | Makita 5007F | Makita 5007MG |
| Scale Visibility | Good | Best |
| Outdoor Use | Good | Excellent |
| Ease of Tuning | Standard | Fast |
| Glove Use | Fair | Great |
Build Quality
The 5007F is like a tank. The aluminum base can take a lot of hits. The 5007MG feels more high-end. It has more rubber on the body to protect it. Both saws have thick cords that do not tangle easily. The MG feels more like a precision tool. The 5007F feels like a heavy-duty tool.
| Metric | Makita 5007F | Makita 5007MG |
| Base Material | Aluminum | Magnesium |
| Durability | High | High |
| Cord Quality | Great | Great |
| Overall Feel | Strong | Premium |
Final Practical Table
| Category | Makita 5007F | Makita 5007MG |
| Accuracy | 9/10 | 10/10 |
| Weight | Heavy | Light |
| Bevel Max | 45 | 56 |
| Value | High | Medium |
| Best For | DIY / Home | Pro Work |
Conclusion
Both saws are great picks. The 5007F is a strong tool for a low price. It is perfect if you only use it now and then. But the 5007MG is the one I would choose for daily work. It is light and very easy to use. Both will help you make great cuts for a long time.