Easy Fix aura heated massage gun not turning on

Last Tuesday was a rough day. I spent six hours at my workbench fixing an old miter saw. By the time I finished, my neck felt like a rusted hinge. I grabbed my Aura Revive, sat on the couch, and hit the power button. Nothing happened. The screen stayed dark. I felt that sink in my gut. I love my tools, but I hate when they fail me.

I did not want to buy a new one. I took it to my desk and started digging. It turns out, these guns are not usually “dead.” They are just finicky. After an hour of testing, I found the real reasons an aura heated massage gun is not turning on.

Why Your Massage Gun Might Seem Dead

Before you throw it away, look at the basics. Most issues come from how we use the device. I found three main fail points in my own testing. I had to slow down and look at each part of the tool.

Common Power Failures

The Master Switch Mistake

This is the most common fix. Most of my power tools have one trigger. The Aura has two steps. On the very bottom of the handle, near the charging port, is a tiny black switch. Mine was flipped to “Off.” I must have bumped it when I put it in the gym bag.

If that switch is off, the back LED screen will not get power. I flipped it to “On.” Then, I had to hold the Start button on the back for three long seconds. The motor hummed to life. I felt like a pro, even though it was a simple mistake.

Testing the Bottom Toggle

If you flip the switch and see no light, plug it in. If the light on the base glows red, your switch is likely fine. If no light shows up even when plugged in, the battery might be the core issue. Try a different outlet just to be safe.

Troubleshooting the Heated Attachment

I bought this model for the heat. On a cold day, that warm metal head feels great on a sore calf. But the heated head is complex. It has small gold pins that send power to the heater. I noticed that if I did not jam the head in hard enough, the gun would error out. It would beep or just shut off.

How to Fix the Heat Head

First, pull the head straight out. Look for dust or lint in the hole. Align the pins carefully. Push until you feel a firm click.

Once I did this, the Heat icon on my screen stayed solid. If your aura massage gun is not turning on while the heat head is on, try a plastic head. If the gun works with the plastic ball, your heat head is the broken part.

Understanding the Battery Logic

I am used to my cordless drills. They work until the battery dies, then they stop. This massage gun is different. It has a brain that protects the battery. It is much more sensitive than a drill or a saw.

The Charging Lockout

I tried to use mine while it was charging. I thought I could use it while it sat near the wall. It did not work. The internal board cuts power to the motor if the cord is in. This stops the battery from getting too hot or failing.

My Charging Data

I tracked how long it took to revive my dead unit. I used my wall timer to see the speed. I wanted to see if the battery was getting weak.

If your gun is totally flat, do not give up after five minutes. I had to leave mine for nearly an hour before the red light even started to blink. It needs a small “jump” of power before the screen can turn on.

The 20 Minute Auto-Shutoff

I was deep into a leg massage while watching the news. Suddenly, the gun died. I smelled the air for any smoke. I found no heat or burning smell. I realized it was just the internal timer.

The Aura has a 20-minute safety clock. This stops the motor from burning out. If yours stops mid-use, it is not broken. It is just resting. I had to wait ten minutes before it would let me start a new cycle. This protects the life of the tool.

Deep Fixes for the Tech Savy

If the lights are on but the motor won’t spin, you might have a stuck sensor. I treat this like a frozen laptop. I did a hard reset to clear the memory. It is a quick trick that works on many small electronics.

How I Reset My Gun

First, I turned the bottom switch to Off. Then, I held the top power button down for twenty seconds. This drains the tiny bit of power left in the circuit. I flipped the bottom switch back to On. It started right up.

If you hear a click but no spin, the motor might be jammed. I gave the head a firm tug while hitting the power button. Sometimes the internal piston gets stuck at the top of the stroke. A little physical nudge can get it moving again.

When to Call for a Replacement

I have fixed a lot of tools in my garage. But some things cannot be fixed at home. If you see these signs, your Aura gun might have a dead board. You should not try to open the case yourself.

• The screen shows an E1 or E2 error code.
• You smell burning plastic or see smoke.
• The device feels very hot near the handle.
• The battery stays red for more than five hours.

These guns are often covered by health shop warranties. Since many people buy them with HSA funds, they have good support. I keep my receipt in the box just in case the battery gives up. It is better to be safe with lithium items.

Final Steps to Get Moving Again

Do not let a dead tool ruin your night. Start at the bottom switch and work your way up. Check each step one by one. Most of the time, your aura heated massage gun is just waiting for the right command.

Flip the base switch and unplug the wall cord. Reseat the massage head and hold the button for three seconds. Mine has been running great since I learned these quirks. It saved my neck and my wallet.

FAQs: Aura heated massage gun not turning on